Gardencoin®Quantum 6W Low Voltage Well Lights, Anti-Glare,ETL Listed, In-Ground Garden Lights LED Landscape Lighting for Pathway Walkway Patio Yard

What makes this light different?

Different from ordinary buried lighting products, the unique grille type shade can be cut directly with a lawn mower, and can effectively avoid dazzling, large size well light provides enough brightness

while having reliable quality, buried barrel with two holes can be inserted directly into the pvc sleeve, providing great convenience in the time of maintenance.

✅Whole Aluminum Body, Rugged Grilles, Lawnmower Can Cut Directly, 12-24V AC/DC: Safe low voltage, more widely matching and safe for surrounding children or pets. UL-listed wires, easy to connect, no worrying about fire hazard.
✅IP67 Waterproof & Embedded Parts Included: Gardencoin In-ground well landscape lights are made of die-cast aluminum for better performance on waterproof and harsh weather.Each 12v inground landscape light comes with an embedded part and two waterproof wiring caps
✅Grilles Design: Rugged grilles, barely protruding, able to be mowed over. Adjust the angle when install, effectively reduce dazzling light, no glare when passing by
✅No Glare Design: Suitable to install on both sides of the path. Combined with CRI90 ultra-high color rendering index, become the finishing touch of your garden landscape Top Performance: Heavy duty, pressure resistance, and 50,000hrs super long service life! Appropriate brightness, not too bright but enough to brighten your yard
✅Intimate Details: No exposed screws, does not rust and strengthened waterproof. Add drainage ditch on lamp surface, easy to wash dust and no water
✅Complete Accessories: Including knock-down holes embedded parts make installing this light very easy. And each light comes with 2pcs of blue waterproof wire nut

How to install the well lights?

Step 1. Dig a 4-1/4inch wide and 3-1/4inch deep hole.(Fig. 1)

Step 2. Pull the fixture out from the embedded part. Remove the waterproof wire nuts from the embedded part. Then remove enough knockouts to accommodate wires.

Step 3. TURN OFF THE POWER. Pass the power supply through the embedded part. Then, place the embedded part in the hole. Use concrete to fill the gap between the embedded part and the hole.

Step 4. Use waterproof wire nuts to connect the lamp wires with the power supply.

Step 5. Buckle the fixture into the embedded part. Then turn the power back on.(Fig. 2)

e.g Suppose there is a set of 4 in-ground lights (each 6W) and 2 path lights (each 4.5W) need to be installed in the garden, How to choose the cable and the transformer?
1. Add the individual light fixture wattages for all lights. 4*6W+2*4.5W=33W
2. The typical distance between two lights is 6-8 feet, but closer or farther is ok too. Based on the above diagram, 6 lights total watts in 0-60 should choose 75-100ft 16AWG power cable.
3. Transformer is large enough to support the Total Fixture Wattage, it should be the best usage within 80 percent of the rated capacity. So in this case a 45W transformer is enough.